Chipotle Golden Ale (and a time-saving trick)

Although it took almost a month to carbonate – that’s why people keg – this is a good beer. It’s a crisp, clean, light, low-alcohol beer with a big chipotle flavor. The inspiration came from a local brewery Latitude 42. It’s not hot; in fact, on my next attempt, I’ll add some Jalapeno’s to make it hotter. I wanted a slight burn as it goes down the throat.

IMG_20151103_131810532_HDR

Chipotle Golden Ale (6 gal.)
6 lb. 2-row
4 lb. Pale Malt
.8 lb. Caramel Crystal 10L
2 oz Liberty 30m (30 m boil)
3 dryed Chipotle peppers at flame out
2 dryed chipotle peppers in fermenter
1 oz cayenne pepper in fermenter
Safale 05 yeast

So many unconventional, time-saving methods for this one. To start, water. I filled the pot with garden hose water, which allowed me to crank the heat as I was filling it, which saved a bunch of time. I was completely mashed in by the 15 minute mark. That’s fast. Second, rather than “mashing in” – i.e., slowly dumping the barley in hot water while trying to stir and trying not to spill – now I simply add the grains to my bag beforehand and dunk the bag of grains in all at once and put the lid on. This is the second time I’ve tried and I love it. No clumps, easy, saves even more time. Third method: 30 minute mash and 30 minute boil. I’ve done that several batches. Another win. I just saved one hour. I was done brewing in 2 hours.

Well, sort of. I only chilled to 90 degrees this time, hoping that my fermentation chamber would finish the job. I did not add ice cold water like I normally do (in fact I don’t plan on diluting from now on). Unfortunately, my chamber was set at 70 degrees, instead of my preferred 30 degrees. I learned that putting 90 degree beer into a 70 degree fermentation chamber takes a long time to cool, especially with an old crappy fridge. The next day it was only down to 80. Fuck it. I pitched the yeast on the hot side and let it rock. Although I am a fan of this method; from now on I will make sure the fridge is cranked low to begin with. Lastly, I used a bottle filler and it worked beautifully. The filler attaches to a 1 inch piece of hose, which attaches directly to my spigot. Easy to clean, easy to install, and it made bottling much faster and more enjoyable. I will be using this from now on.

I’m happy to report that all these ‘controversial’ methods – water, short mash and boil, no sparge, pitching hot, and, of course, using one vessel for the entire process – produced another good beer. I love it. So does my wife.

As for long carbonation time – longer than I’m used to I should say, many people swear that a month is normal – I think it’s a result of using gelatin (less gunk in the bottle), of low-alcohol beer perhaps, and a well floculated fermentation.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s